Radial ShotGun Instrument Buffer & Splitter

Description

The Shotgun makes it easy to drive multiple amplifiers cleanly and in phase without buzz or hum from ground loops. In mono operation, connect to input-1 of the Shotgun and you can feed up to four amps simultaneously. For stereo setups, the Shotgun automatically reconfigures when both inputs are used; feeding input-1 to the first two amplifiers, and input-2 to the second pair. Isolation transformers and ground lifts are included on the outputs to eliminate ground loop noise, along with 180° polarity reverse switches to ensure all amps are phase-matched. =+= Technical Specification
Audio circuit type
Buffered signal distribution with 3 isolated outputs
Frequency response
20Hz ~ 20kHz
Dynamic range
92dB
Gain
0dB/-0.2dB
Clip Level
+4dBu
Total harmonic distortion
<0.02% @ -20dB Intermodulation Distortion ~0.02% Input Impedance 220K Ω Output Impedance 1.8K Ω Equivalent Input Noise -90dBu Noise -86dBu Maximum Input +8dBu Ground lift, Phase Adjustment Construction 14-gauge steel chassis and outer shell Size (L x W x D) 4.5" x 3.5" x 1.37" (114 x 92 x 35mm) Weight 1.1lb (0.5kg) Shipping size (L x W x D) 6.38" x 4.25" x 3" (162 x 108 x 76mm) Shipping weight 1.4lb (0.63kg) Power 9 VDC - 25mA, center negative Conditions For use in dry locations only between 5°C and 40°C