Radial Relay Xo Balanced Remote AB Switcher
Radial

Radial Relay Xo Balanced Remote AB Switcher

£314.00

Designed to address on-stage communication problems for artists who employ in-ear monitoring systems, the Relay Xo is a remotely controlled active switcher that enables artists on stage to quickly reroute their signal without disrupting the performance. Connect the output of a dynamic microphone or wireless receiver to the Relay Xo input, then feed output-A to the PA system, and output-B to a common intercom buss. As soon as the Relay Xo is switched, it cuts the signal feeding the PA and redirects it to the monitoring system, allowing the musician to discreetly speak with other band members or the crew. When artists that employ wireless microphones on tour, the receivers are typically located off stage. The remote input on the Relay Xo allows it to be connected next to the wireless receivers to reduce cable clutter, while still providing control to the artist on stage with a remote footswitch. Two versions of the Radial JR1 footswitch are available for use with the Relay Xo; the JR1-M with a momentary switch that will activate output-B as long as the footswitch is held down, and the JR1-L with a latching switch that will hold on the last selected output.

SKU: EARFR800-8030-00 Category: Brand:

Description

Designed to address on-stage communication problems for artists who employ in-ear monitoring systems, the Relay Xo is a remotely controlled active switcher that enables artists on stage to quickly reroute their signal without disrupting the performance. Connect the output of a dynamic microphone or wireless receiver to the Relay Xo input, then feed output-A to the PA system, and output-B to a common intercom buss. As soon as the Relay Xo is switched, it cuts the signal feeding the PA and redirects it to the monitoring system, allowing the musician to discreetly speak with other band members or the crew. When artists that employ wireless microphones on tour, the receivers are typically located off stage. The remote input on the Relay Xo allows it to be connected next to the wireless receivers to reduce cable clutter, while still providing control to the artist on stage with a remote footswitch. Two versions of the Radial JR1 footswitch are available for use with the Relay Xo; the JR1-M with a momentary switch that will activate output-B as long as the footswitch is held down, and the JR1-L with a latching switch that will hold on the last selected output. =+= Technical Specification
Audio circuit type
Remotely controlled mechanical relay
Frequency response
10Hz ~ 100kHz
Dynamic range
>140dB
Gain
0dB
Total harmonic distortion
<0.0005% Intermodulation Distortion 0.00% Input Impedance Source dependent Output Impedance Source dependent Common Mode Rejection Ratio -106dB Noise -115dBu Maximum Input +26dBu Ground lift Input Connectors XLR-F input Output Connectors 2 XLR-M outputs Extras Combo (XLR-F & ¼" ) and ¼" loop-through remote connectors; Contact Closure Function: With ¼" TRS jack, short tip and ground to switch With XLR, short pin-1 ground and pin-2 Hot to switch Construction 14 gauge steel with internal I-beam Size (L x W x D) 5" x 3.3" x 1.8" (127mm x 84mm x 45.5mm) Weight 1.4 lbs (0.6kg) Shipping size (L x W x D) 6.5" x 4" x 3" (165mm x 102mm x 76mm) Shipping weight 2.4lbs (1.08 kg) Power 15VDC, 30mA, center-pin (+) Conditions For use in dry locations only between 5°C and 40°C

Additional information

Brand

Radial

Reviews

There are no reviews yet.

Be the first to review “Radial Relay Xo Balanced Remote AB Switcher”

Your email address will not be published. Required fields are marked *

Related products