My Account Icon

Radial ProMS2 Passive Microphone Splitter

The ProMS2 is a mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A high quality Eclipse transformer inside provides galvanic isolation to eliminate hum and buzz from ground loops, while delivering a wide frequency response and low distortion. Ground lifts on the outputs help further reduce…

£157.00
Category:
Brand:

Description

The ProMS2 is a mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A high quality Eclipse transformer inside provides galvanic isolation to eliminate hum and buzz from ground loops, while delivering a wide frequency response and low distortion. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to be connected as well. The ProMS2 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak. =+= Technical Specification
Audio circuit type
Passive
Transformer
Eclipse ET-MS10
Frequency response
20Hz ~ 20KHz (+0dB -1dB)
Dynamic range
>140dB
Gain
-0.5dB
Total harmonic distortion
0.00%
Intermodulation Distortion
0.00%
Phase Deviation
1° @ 20Hz
Input Impedance
2.5K Ohms, unbalanced
Output Impedance
140K Ohms, balanced
Common Mode Rejection Ratio
-115dB at 60Hz
Noise
-140dB
Maximum Input
+26dBu
Input Connectors
XLR-F
Output Connectors
XLR-M
Construction
14-gauge steel chassis & outer shell
Weight
1.55lb (0.7kg)
Shipping weight
1.92lb (0.87kg)
Power
Passive, no power required
Conditions
For use in dry locations only between 5°C and 40°C

Additional information

Brand

Radial

Reviews

There are no reviews yet.

Be the first to review “Radial ProMS2 Passive Microphone Splitter”

Your email address will not be published. Required fields are marked *