Radial LX8 – Line Level Signal Splitter and Isolator

Description

The Radial LX8 is designed specifically to manage balanced signal splitting in professional audio systems. The single rack space design begins with a 100% passive circuit which means it does not require any power to operate. Inside, each of the eight channels is equipped with a premium Jensen® JT-123-SLPC transformer that is able to handle transients in excess of +26dB at all frequencies right down to 20Hz without audible distortion. This results in an accurate signal transfer with minimal phase shift or distortion. When used in larger systems, you benefit from significantly lower noise, making the LX8 the best choice for any demanding multi-channel audio system. =+= Technical Specification
Audio circuit type
Passive transformer based line level splitter
Transformer
Jensen JT-123-SLPC
Number of channels
8 channel 3-way splitter
Frequency response
20Hz ~ 20KHz (+0dB/-0.1dB)
Dynamic range
140dB
Total harmonic distortion
0.003% @ 1kHz
Phase Deviation
0.2° @ 100Hz; 0.4° @ 20Hz
Input Impedance
600 Ohms, balanced
Output Impedance
600 Ohms, balanced
Common Mode Rejection Ratio
-85dB @ 60Hz
Maximum Input
+26dBu @ 1kHz, +24dBu @ 20Hz
Ground lift
Input Connectors
XLR, DB-25, Euroblock
Output Connectors
XLR, DB-25, Euroblock
Construction
14-gauge steel
Size (L x W x D)
19″ x 6″ x 1.75″ (48.25 x 15.25 x 4.45cm)
Weight
7.5lb (3.4kg)
Shipping size (L x W x D)
22″ x 10.375″ x 4.5″ (55.9cm x 26.4cm x 11.4cm)
Shipping weight
8lb (3.63kg)
Power
Passive, no power required
Conditions
For use in dry locations only between 5°C and 40°C