Radial LX-2 Passive Balanced Line-Level Splitter & Attenuator

Description

The LX-2 performs the dual functions of splitting a line level audio signal and providing level attenuation where necessary. A premium Jensen transformer inside provides exceptional frequency response and phase coherency to ensure that the highest audio quality is maintained, while isolating the two outputs from each other to eliminate hum and buzz from ground loops. For situations where a level adjustment is required, the trim control on the LX-2 allows you to attenuate overly hot signals. This gives you the ability to drive your mic preamps hard to achieve coloration, while trimming the level at the LX-2 to avoid clipping the inputs of your recording interface. This trim control is activated by a recessed ‘set & forget’ switch; if attenuation is not needed, simply disengage this switch to prevent accidental and unwanted level adjustments. =+= Technical Specification
Audio circuit type
Passive, transformer based
Transformer
Jensen JT-11-FLPCH
Number of channels
1 input, 1 iso output, 1 direct output
Frequency response
20Hz – 20kHz +/-0.5dB
Dynamic range
140dB
Gain
-1.5dBu
Total harmonic distortion
<0.001% @ 1kHz Phase Deviation +0.3° @ 20Hz Input Impedance 716Ω Output Impedance 116Ω Common Mode Rejection Ratio 94dB @ 60Hz, 83dB @3kHz Noise -119dBu Maximum Input +21dBu Ground lift, Level Control Input Connectors Combo XLR / 1/4" Construction 14-gauge steel Size (L x W x D) 84mm x 127mm x 48mm (3.3" x 5" x 2") Weight 0.7kg (1.5lbs) Shipping size (L x W x D) 102 x 76 x 165mm (4" x 3" x 6.5") Shipping weight 0.87 kg (1.92 lbs) Power Passive, no power required Conditions For use in dry locations only between 5°C and 40°C