Radial Key-Largo – Keyboard Mixer and Performance Pedal

Description

Designed for stage use, the Key-Largo allows you to connect up to three stereo keyboards, effects and volume pedals, and a laptop computer via USB, managing all these signals to send a balanced audio feed to a PA system for a seamless performance on stage. Three stereo analog inputs feature individual volume controls to balance levels, and each can be sent to a shared effects loop to add reverb or delay in an instant using a dedicated footswitch. A USB connection allows laptop computers to be integrated into the setup for control of soft-synths, and a built-in sustain footswitch and connections for a stereo volume pedal provide additional ways to control your performance. =+= Technical Specification
Audio circuit type
Active circuit with audio-grade operational amplifiers
Number of channels
3x stereo analog inputs, 1x stereo USB input, 2x stereo analog outputs
Frequency response
20Hz – 20kHz ±0.5dB
Gain
+12dBu
Clip Level
+12dBu
Total harmonic distortion
<0.005% @ 1kHz Input Impedance Analog 20k Ohms Output Impedance XLR: 300 Ohms 1/4": 450 Ohms Noise -91dBu Noise 24bit / 192kHz 180° polarity reverse, Ground lift, Level Control, Effects Loop Input Connectors 3x Stereo Analog Inputs, 1 x Stereo USB Input Output Connectors Stereo XLR Balanced Outputs, Stereo 1/4" Monitor Outputs Extras Performance or Recording Mode Construction 14-gauge steel Size (L x W x D) 8.4" x 5" x 1.9" (21.3cm x 12.7cm x 4.8cm) Weight 3.25lb (1.47kg) Shipping size (L x W x D) 13.3" x 5.1" x 3" (33.7cm x 13cm x 7.6cm) Shipping weight 4.3lb (1.95kg) Conditions For use in dry locations only between 5°C and 40°C