Radial JD7 Injector: Guitar Distribution & Splitter – Jensen

Description

The JD7™ is a guitar signal splitter that is able to drive as many as seven amplifiers at the same time without introducing noise, signal loss, or hum and buzz from ground loops.

The JD7 allows you to feed up to seven amplifiers simultaneously, with premium Jensen transformers on the outputs that ensure distortion-free signal transfer while blocking hum and buzz from ground loops. To help retain the natural tone of your instrument, Drag control load correction is also featured on the input so you won’t lose the tone and feel of connecting your guitar directly to an amplifier.

The JD7 has a built-in Radial DI box, so you can take a clean guitar track directly to your recording interface while simultaneously playing through multiple amplifiers. A Reamp input allows you to send your recorded guitar track from your recording device back through any or all of your amps, so you can focus on the performance and have the freedom to tweak your amps and microphones later on. =+= Technical Specification
Audio circuit type
100% discrete class-A with transformer isolation
Number of channels
2 Input 7 Outputs
Frequency response
20Hz ~ 20kHz (± 1dB)
Dynamic range
125dB (unbalanced input to unbalanced output)
Total harmonic distortion
0.05% @ 1k (unbalanced) 0.1% @ 1k (balanced)
Intermodulation Distortion
0.2% @ -20dBu
Input Impedance
Variable from 10k Ohms ~ 1megaOhm
Output Impedance
¼” unbalanced: 10k Ohms; XLR balanced: 150 Ohms
Noise
-115dBu
Maximum Input
+13dBu (unbalanced) +23dBu (balanced)
Input pad, 180° polarity reverse, Ground lift, Drag Control, Effects Loop
Input Connectors
1/4″, XLR
Output Connectors
1/4″, XLR
Construction
14 gauge steel chassis & outer shell
Size (L x W x D)
17.5″ x 6″ x 1.75″ (44.5cm x 15.25cm x 4.45cm)
Weight
7.5lb (3.4 kg)
Shipping size (L x W x D)
22″ x 10.375″ x 4.5″ (55.9cm x 26.4cm x 11.4cm)
Shipping weight
8lb (3.63kg)
Power
+15VDC/400mA adapter included
Conditions
For use in dry locations only between 5°C and 40°C