Radial EXTC-SA Guitar Effect Interface for SA Series

Description

The EXTC allows you to get creative with your effects pedals, using them in your mix on any recorded track. Add a touch of distortion or chorus to a lead vocal, flange on a violin, or fuzz on piano – the possibilities are endless. The EXTC takes the line level balanced output of your recording interface and converts it so an instrument level high-Z output optimised for guitar effects pedals, so you can Reamp any track through your pedalboard with ease. Once you’ve run the signal through your pedals, connect the output back into the EXTC and it will boost it up to a balanced line level so you can connect directly to the input of your recording interface. The EXTC features Radial’s class-A buffer for the best audio quality and transformer isolation to eliminate any buzz or hum – so you can focus your attention on using your pedals in new and exciting applications. =+= Technical Specification
Audio circuit type
Solid state with transformer coupled effects loop
Frequency response
Dry: 20Hz ~ 20kHz ±1.5dB Wet: 20Hz ~ 10kHz ±3.5dB (-8dB @ 20kHz)
Total harmonic distortion
Dry: >0.005% 0dB output Wet: >0.002% 0dB output
Intermodulation Distortion
Dry: >0.003% 0dBu input Wet: <0.02% 0dBu input Input Impedance Line level: 15k Ohms Output Impedance Line level: 200 Ohms Noise Dry: -93dB Wet: -84dB Maximum Input Dry: +26dBu Wet: +20dBu 180° polarity reverse, Effects Loop Input Connectors Unbalanced 1/4", Balanced XLR Output Connectors Unbalanced 1/4", Balanced XLR Conditions For use in dry locations only between 5°C and 40°C