Radial 4-Play DI box for Multi-Instrumentalists

Description

Many performing multi-instrumentalists will have each of their instruments feed a separate channel in the PA system, allowing for individual level, EQ, and effects settings. Typically this would require multiple DI boxes and instrument cables, creating a mess on stage that can be difficult to manage. With the 4-Play, you only need to connect one cable to the input of the pedal, and it provides you with four DI outputs to feed the PA system. Not only does this mean fewer cables on stage and less devices to keep track of, but it also eliminates the need to flag down the sound engineer when you need to switch instruments during a performance. The 4-Play puts you in control, while streamlining your setup on stage. =+= Technical Specification
Audio circuit type
Classic Class-A FET input with balanced audio grade opamp output
Number of channels
4
Frequency response
20Hz – 20kHz
Dynamic range
113dBu
Gain
0dBu
Clip Level
+13dB
Total harmonic distortion
0.03%
Intermodulation Distortion
0.02%
Phase Deviation
-0.12° @ -20dBu / 1kHz
Input Impedance
10M Ω
Output Impedance
5.4K Ω
Noise
-100dBu
Maximum Input
+8dBu
Ground lift
Input Connectors
1/4″
Output Connectors
4x XLR
Extras
Tuner output
Construction
14-gauge steel chassis & outer coat
Size (L x W x D)
5″ x 4.7″ x 2″
Weight
2lb
Shipping size (L x W x D)
6.5″ x 5.1″ x 2.5″
Shipping weight
2.4lb
Power
9V Adaptor / 80mA center pin negative
Conditions
For use in dry locations only between 5°C and 40°C