Lab Gruppen FP 10000Q – 10,000W 4-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control for Touring Applications

Description

The Lab Gruppen FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is the now proven technological milestone that is Lab Gruppen’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q.

• 10,000 Watt, 4-channel amplifier with up to 2,500 Watts output per channel and NomadLink network for monitoring and control
• Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
• 4 x 2,500 Watts into 2 Ohms, 4 x 2,100 Watts into 4 Ohms, 4 x 1,300 Watts into 8 Ohms, 4 x 660 Watts into 16 Ohm
• Proven and reliable Class-TD output stage delivers Class A/B audio quality with Class D efficiency
• Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
• Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
• Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
• Efficient Intercooler copper cooling system dissipates more heat for extended peak output
• 4 x balanced analog audio inputs on Neutrik XLR connectors
• 4 NL4 Neutrik speakON output connectors
• Removable dust filter grilles for increased air circulation
• Rugged 2U rackmount chassis for durability in touring applications =+= Technical Specification
GENERAL
Number of channels
4
Peak total output both channels driven
10000 W
Peak output voltage per channel
150 V
Max. output current per channel
50 A peak
MAX OUTPUT POWER (Per ch. – both ch.’s driven)
2 Ohms
2500 W
4 ohms
2100 W
8 ohms
1300 W
16 ohms
660 W
PERFORMANCE WITH GAIN: 35dB and VPL: 150 V
THD 20 Hz – 20 kHz for 1 W
<0.1% THD at 1 kHz and 1 dB below clipping <0.05% Signal To Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz
>70 dB
Frequency response (1 W into 8 ohms) +0/-3 dB
6.8 Hz – 34 kHz
Input impedance
20 kOhm
Common Mode Rejection (CMR)
>54 dB, 20 Hz to 20 kHz
Output impedance @ 100 Hz
32 mOhm
VPL MAX OUTPUT
VPL, selectable per ch.
150, 121, 101, 83, 70, 56, 47, 38 V
VPL, selectable when bridged
300, 242, 202, 166, 140, 112, 94, 76 V
Voltage Peak Limiter mode (per ch.)
Hard / Soft
GAIN AND LEVEL
Amplifier gain selectable (all channels)
23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain
35 dB
Level adjustment (per ch.)
Front-panel potentiometer, 31 position detented from -inf to 0 dB
CONNECTORS AND SWITCHES
Input connectors (per ch.)
3-pin XLR, electronically balanced
Output connectors (per ch.)
Neutrik speakON or Binding Posts (must be specified upon order)
Output bridge mode per two ch.’s
A+B – Ch. A is signal input source
NomadLink network
On board, 2 x RJ45 etherCON® connectors, IN and OUT
Intelligent fans (on/off)
Yes, depending on presence of output signal
Power on/off and Remote enable on/off
Individual switches on front-panel
Cooling
Two fans, front-to-rear airflow, temperature controlled speed
FRONT PANEL INDICATORS
Common
NomadLink network; Power Average Limiter (PAL); Power on
Per channel
Signal present / High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL); Very High Frequency (VHF); High temperature; Fault; Mute
POWER
Operating voltage, 230 V / 115 V nominal
130-265 V / 65-135 V
Minimum power-up voltage, 230 V / 115 V
171 V / 85 V
Power Average Limiter (PAL)
Yes
Soft start / Inrush Current Draw
Yes / max. 5 A
Mains connector
230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
PHYSICAL
Dimensions
W: 483 mm (19”), H: 88 mm (2 U), Overall D: 396 mm (15.6”), Mounting D: 358 mm (14.1”)
Weight
12 kg (26.4 lbs.)
Finish
Black painted steel chassis with black painted steel / aluminum front
Approvals
CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC