My Account Icon

Work WorkPro PA 200 – 2 x 100 W Power Amplifier

PA 200 is an installed sound amplifier that can operate with low impedance or 70/100 V line loudspeakers. The operating mode is selected through a switch in the rear side and a dipswitch block which has some terminals reserved for future improvements. It incorporates switching power. It also incorporates an unbalanced LINE input with its…

£407.52
Category:
Brand:

Description

PA 200 is an installed sound amplifier that can operate with low impedance or 70/100 V line loudspeakers. The operating mode is selected through a switch in the rear side and a dipswitch block which has some terminals reserved for future improvements.

It incorporates switching power. It also incorporates an unbalanced LINE input with its own volume control and LEDs which mark the signal presence anda limit state. In the rear side is allocated an RJ45 connector which admits RS485 commands from an external device in order to control some features. =+= Technical Specifications
Power
2 x 100 W @ 8 Ohm, 200 W @ 70/100V
Frequency Response
20 Hz – 20 KHz
THD+N
< 0.1% @ 1 KHz, 15 W, 8/16 Ohm; < 0.2% @ 1 KHz, 30 W, 70/100V Controls Volume, Function selector, RS485 Connectors Power supply: 1 x IEC. Audio In: RCA. Audio Out: Terminals. Control 485: RJ45 Power supply AC 110/240V - 50/60 Hz Dimensions (HxWxD) 48 x 215 x 264 mm Weight 2.3 Kg

Reviews

There are no reviews yet.

Be the first to review “Work WorkPro PA 200 – 2 x 100 W Power Amplifier”

Your email address will not be published. Required fields are marked *