My Account Icon

Tight AV TiGHT AV Dante 2 Channel XLR Input Adaptor

This is a plug and play PoE Dante interface which inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinateโ€™s original Dante Ultimo chip. Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a…

£208.29
Category:
Brand:

Description

This is a plug and play PoE Dante interface which inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinateโ€™s original Dante Ultimo chip. Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector.

โ€ข Plug and Play
โ€ข 2 x line inputs on standard XLR female connectors
โ€ข Dante and AES67 support
โ€ข 24-bit audio support
โ€ข Supports 802.3af PoE
โ€ข Dante Controller and Dante Domain Manager compatible =+= Technical Specification
AUDIO
Max signal level
+24 dBu / +4 dBu / 0 dBu 0 dBV /-10 dBV
Frequency Response
20 Hz to 20 kHz (-/+0.5dB)
Impedance
20k Ohm balanced 10k Ohm unbalanced
Dynamic Range
>100 dB
Signal to Noise Ratio
>100 dB
THD
<0.01% @+4 dBu DANTE Sample Rate 44.1 kHz, 48 kHz, 96 kHz Bit Depth 24 Dante Device Latency 1, 2 or 5 ms (configurable using Dante Controller) Network Transport Dante Audio over IP AES67 RTP GENERAL Connectors 2 XLR-F Operation Temperature -5 to +55 (+23ยฐ to +131ยฐF) Storage Temperature -25 to +70โ„ƒ (-13ยฐ to +158ยฐF) Power 802.3af PoE Power Consumption 3.15W (Max) Dimension (W*H*D) 30 x 28 x 114 mm Cable length 300mm Net Weight 145g

Reviews

There are no reviews yet.

Be the first to review “Tight AV TiGHT AV Dante 2 Channel XLR Input Adaptor”

Your email address will not be published. Required fields are marked *