Primacoustic Offset Impaler

Description

The Primacoustic Offset Impaler offers an effective method to increase bass absorption by introducing an air cavity behind a Broadway panel. This delivers as much as one extra octave of low frequency attenuation without any additional cost.

The U-shaped design is equipped with pivoting darts for left-hand or right-hand installations, thus allowing the same part to be used on either side of the panel. Front access holes provide easy access for a screwdriver or power drill to quicken installation. Because the Offset Impaler employs a 3.5″ (8.89cm) stand-off, it matches the size of a typical two-by-four making it simple to integrate using standard building supplies during construction. This makes flush mounting easier for installations such as studios and home theatres where added bass absorption is usually desired.
Push-On Impaler =+= Material
20 gauge galvanized steel
Dimensions
7.62cm x 12.70cm; Offset 8.89cm from wall surface
Attachment Points
4 (Use an appropriate fastener for wall surface)
Max Load Limit
3.63kg (dependant on wall fastener)
Number per Box
8 per box