FBT Touring & Install MODUS 215FSA Band-pass push-pull Active subwoofer – 2×15″ – 2000Wrms

Description

The MODUS 215FSA is a dual 15” subwoofer with a bandpass design and push-pull configuration, delivering significantly extended low frequency response despite it’s compact size. It is acoustically designed to support two or three MODUS 4805 or 4820 modules.

The FBT MODUS 215FSA powered subwoofer meet the following performance criteria: frequency response of 33 Hz to 100Hz, peak output of 146 dB half-space, input impedance 22 kOhm .

FBT MODUS 215FSA is of bandpass design incorporating 2×15” B&C neodymium woofers with 4” voice coil. High efficiency internal amplifier 2000W in “D” Class with switch mode power supply and built in DSP signal processor with 6 eq. presets cardioid configurations.

All components are mounted in a 0,70″ birch plywood enclosure with a resistant black textured finish.

The rear facing input panel provides XLR signal input and link, level control, preset, delay , phase 0°-180° switch, diagnostic led, power supply with Neutrik powercon cable duplex with input and output.

The FBT MODUS 215FSA can be suspended above the line array modules or ground stacked.