AtlasIED HPA2602 Dual Channel 3200 Watt Commercial Amplifier

Description

The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads. The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation II Class I Output topology that gives the efficiency close to a Class D amplifier with the sound quality of a Class AB amplifier. The power supply is switch mode global auto sensing gen 3 design that maintains a stable output during fluxuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage and current to virtually any speaker load.

The HPA Series features front panel indented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante™ 2 or 4-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Star standards with only drawing 1W of power in standby mode. Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the AtlasIED HPA Series is the answer for high power/cost effective amplification need. =+= Technical Specification
POWER OUTPUT
70.7V
2 x 1300W
100V
NA
8Ω
2 x 800W
4Ω
2 x 1300W
2Ω
2 x 1800W
8Ω Bridged
1 x 2500W
1Ω RMS Power Output
1 x 3200W
SPECIFICATIONS
Frequency Response
20Hz – 20kHz
THD
<0.05% Channels Two Signal To Noise Ratio >85dB
Connector Type
Terminal Block & Phoenix
Width
19″ (483mm)
Depth
15″ (381mm)
Number Of Fans
1 – Variable Speed
BTU All Channels Driven AES
4265 BTU (70.7V, 120VAC)
Max Current All Channels Driven Continuous
18.4A
Rack Units
2 RU
Height
3.5″ (89mm)