AMX NMX-ENC-N3312D – 4K60 H.26X/Dante AV-H Dual Stream Encoder

Description

The AMX SVSI NMX-ENC-N3312D Encoder delivers the highest quality 4K60 H.26x and Dante AV-H video content at the lowest bandwidth. This extends the reach of SVSI 4K60 networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile device applications.
In addition to transmitting HDCP content to N3300 decoders, it also features recording of video to a USB 3.0 external drive, video preview images viewable from the built-in web interface or from a touch panel, and enhanced support for high-security networks. N3300 Encoders simultaneously output up to 4K60 H.26x or Dante AV-H on the primary stream and a high-compatibility H.26x secondary video stream to provide design flexibility and the most compatible options for remote viewing or recording.
The NMX-ENC-N3312D supports Dante AV-H, a standard for AVoIP devices created to allow for the interoperability of multiple devices on the network. With Dante AV-H, the NMX-ENC-N3312D is compatible with Dante Studio, a suite of software tools for PC, that allows you to monitor or bring video directly into UC, recording, production, or streaming applications without the need for additional hardware. Dante Controller handles all device routing, naming and configuration, while Dante Domain Manager provides IT-level management over device organization, user access, multiple subnet coordination and complete audit logs for every endpoint and user.
Additionally, the H.264 stream generated by the NMX-ENC-N3312D is compatible with N3000 series decoders, N2600S decoders, and the NMX-WP-N3510 Windowing Processor.
Moving 4K60 video to or from the Cloud just became a lot easier with the AMX SVSI NMX-ENC-N3312D Encoder.
• High-quality 4K60 H.26x or Dante AV-H primary stream
• High-compatibility, Low-bandwidth 1080p H.26x secondary stream
• Audinate® Dante AV-H H.26x support of up to 4K60 resolutions
• Video Preview viewable from the built-in web interface or a touch panel
• Dante Audio
• USB 3.0 video recording capability
• Support for high-security networks
• PoE+ powered with low-power mode for energy savings.
• Stand-alone box and card form factors
• UL2043 – Plenum Space certification =+= Technical Specification
VIDEO
Digital Video Input
Network video over Ethernet via RJ45 port
Digital Video Output
HDMI 2.0
Formats
HDMI 2.0, HDCP 2.2 content protection support
Progressive Input Resolutions
Supports most common HD resolutions up to 4K60 4:4:4
Output Resolutions
720p, 1080p, 4K60, or input resolution if the scaler is disabled
Output Scaling
Scaling adds one frame of latency (17ms at 60fps)
Colour Space
4:4:4, YUV
LocalPlay/HostPlay
8 playlists
Secondary H.26x
H26x stream is compatible so long as the source is not HDCP
H264/H265 VIDEO
Stream Video Output
Up to 4K60 4:4:4
Frame Rate
50 or 60 Hz
Profiles
H264: Baseline (BP), main (MP), high (HiP) / H265: main (MP)
Bitrate Range
500 Kbps to 32 Mbps
Rate Control
VBR, CBR
Streaming Protocols
RTP, RTSP, RTMP, RTMP/S, SRTP, Dante AV-H
AUDIO
Input Signal Types
Network audio over ethernet
Output Signal Types
Embedded audio on HDMI or Analog Audio Output
HDMI Audio Formats
8ch PCM, Dante 2ch
Analogue Audio Format
Stereo 2-channel
Audio Breakaway
Supported
LATENCY
Latency
End to end video Latency: 110ms
COMMUNICATIONS
Ethernet
10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP and Static IP
HDMI
HDCP, EDID management
PORTS
+12V 2A
One 12 Volt DC power input
P0 PoE+
8-wire RJ45 port. 10/100/1000 Mbps 10/100/1000Base-T auto sensing gigabit Ethernet switch port. Provides network connection, network AV video, and power to the Encoders and Decoders PoE+ power.
P1
8-wire RJ45 port. 10/100/1000 Mbps 10/100/1000Base-T auto sensing gigabit Ethernet switch port. Provides network connection, network AV video.
IR IN (front panel)
3-pin terminal Phoenix connector. Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically, 39 kHz) IR receiver is necessary (not included).
IR OUT
2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz; typically, 39 kHz). Emitter is necessary (not included).
RS232
3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate.
AUDIO
5-pin terminal Phoenix connector which provides user- selectable balanced/unbalanced output. Dedicated audio input.
HDMI OUT
HDMI video output (passive pass-through from HDMI IN only)
HDMI IN 1
HDMI video input
HDMI IN 2
HDMI video input
USB 3.0
Allow up to 2TB external hard drive for recording of non-HDCP content.
CONTROLS AND INDICATORS – FRONT PANEL
RESET Button
Recessed pushbutton. Press to initiate a ‘warm restart’ causing the processor to reset, but not lose power. A reset does NOT affect the current settings.
ID Button
Recessed pushbutton. Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command). Holding the button for 30 seconds and releasing will cause the device to return to factory configuration.
POWER LED
On solid (green) when operating power is supplied (via PoE or local power supply)
STATUS LED
On flashing (green) when there is software activity
STREAM LED
On (green) when the unit is streaming video
POWER SUPPLY
Power Supply, External, Optional
2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; optional NMX-ACC-N9312 (FGN9312)
Power over Ethernet (PoE), External, Optional
Can be powered via a PoE+ switch or other equipment with a PoE+ source. Conforms to IEEE 802.3at Class 4 (802.3at Type 2) NOTE: For the unit to receive Power over Ethernet (PoE+), it must be connected to a switch or other equipment that has a PoE+ PSE (Power Sourcing Equipment) port. Warning: Do not run wiring connected to a PoE+ PSE port outside of the building where the PSE resides. It is for intra-building use only.
ENVIRONMENTAL
Temperature
32° to 104°F (0° to 40°C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation
85 BTU/hr
GENERAL
Product Dimensions (LWD)
200cm x 127cm x 26.6 cm
Product Weight
1.41 lbs. (Approx. 0.45kg)
Shipping Weight
2.78 lbs. (Approx. 1 kg)
Regulatory Compliance
FCC, CE, and UL (Including 2043)