Your basket is currently empty!
The AtlasIED High Power Amplifier โHPAโ Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 8 ohm loads. The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation…
The AtlasIED High Power Amplifier โHPAโ Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 8 ohm loads. The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation II Class I Output topology that gives the efficiency close to a Class D amplifier with the sound quality of a Class AB amplifier. The power supply is switch mode global auto sensing gen 3 design that maintains a stable output during fluxuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage and current to virtually any speaker load.
The HPA Series features front panel indented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Danteโข 2 or 4-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Star standards with only drawing 1W of power in standby mode. Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the AtlasIED HPA Series is the answer for high power/cost effective amplification need.
โข Four Output Channels
โข 4ฮฉ, 8ฮฉ, 70V, & 100V Operation
โข Balanced Inputs
โข Danteโข Accessory Card Slot
โข Fault Reporting
โข Remote Turn On
โข Indented Attenuators with Security Cover
โข Auto Sensing 100V-240V~ AC Mains Power Supply
โข Meets Energy Star Standards 1W Standby Mode =+= Technical Specification
POWER OUTPUT
70.7V
4 x 650W
100V
4 x 650W
8ฮฉ
4 x 650W
4ฮฉ
4 x 650W
2ฮฉ
NA
8ฮฉ Bridged
NA
1ฮฉ RMS Power Output
NA
SPECIFICATIONS
Frequency Response
20Hz – 20kHz
THD
<0.15%
Channels
Four
Signal To Noise Ratio
>70dB
Connector Type
Terminal Block & Phoenix
Number Of Fans
1 – Variable Speed
BTU All Channels Driven AES
2132.5 BTU (70.7V, 120VAC)
Max Current All Channels Driven Continuous
26.9A
Rack Units
2 RU
Height
3.5″ (89mm)
Width
19″ (483mm)
Depth
15″ (381mm)
Reviews
There are no reviews yet.