Radial Voco-Loco – Effects Switcher for Voice or Instruments

Description

The Voco-Loco combines a microphone preamp with a guitar pedal effects loop, allowing a lead vocalist, sax or trumpet player to add guitar pedals to their audio signal path just like an electric guitarist adds effects for soloing. Simply plug your mic into the Voco-Loco via the XLR input, connect your effects pedals using standard ¼” guitar cables, and then send the output from the Voco-Loco to the input on your mixer. Now with the touch of a footswitch you can add your favorite delay, reverb, distortion or wah-wah to any mic’d up instrument or vocal – the options are only limited by your imagination. =+= Technical Specification
Audio circuit type
Integrated Op-Amp with Class A FET input circuit
Frequency response
20Hz ~ 20kHz
Dynamic range
100dB
Gain
52dB
Clip Level
+15dBu
Total harmonic distortion
<0.005% Intermodulation Distortion <0.005% Phase Deviation 8° @50Hz Input Impedance 10K-Ohms, 100K (FX Loop) Output Impedance 300 Ohms, 3000 Ohms (FX Loop) Common Mode Rejection Ratio -73dB @55Hz Equivalent Input Noise -120dBu Noise -85dBu Maximum Input +10dB Input pad, 180° polarity reverse, Ground lift, Effects Loop Input Connectors XLR-F Output Connectors XLR-M Construction 14 gauge steel chassis and outer shell Power 100mA, center positive Conditions For use in dry locations only between 5°C and 40°C